Come work
with us.

Assists in repairing and maintaining machinery, equipment, physical structures, and plumbing and electrical systems across the plant.

What you'll do:

• Dismantle machines and equipment, replace defective parts and motors, and adjust feed mechanisms
• Clean and lubricate machine parts (shafts, pulleys, gears, bearings); replace or repair machine belts
• Electrical work: bend and cut conduit, run wire, connect motors and fixtures, replace switches and fuses
• Plumbing work: bend, cut, and thread pipe; clear clogged drains; replace fixtures
• Operate welding machinery to repair or join metal parts
• Building upkeep: patching, painting, and building worktables, benches, and shelving
• Keep machines, tools, and the work area clean and in good order; accurate time reporting

Requirements:

• Associate degree (required)
• 2 years of maintenance experience (required)
• 2 years working with Programmable Logic Controllers (required)
• Shop math: add, subtract, multiply, and divide whole numbers, fractions, and decimals; compute rate, ratio, and percentages
• Able to follow instructions in written, oral, or diagram form and work through practical problems
• Focused, with attention to detail
• Forklift operator certification — we can certify you on site

Benefits:

• 401(k) with matching
• Health, dental, and vision insurance; health savings account
• Life insurance and paid time off
• Tuition reimbursement and referral program

Physical demands: regularly stand and reach with hands/arms; regularly lift and/or move up to 25 pounds and frequently up to 50 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

In-person position. People with a criminal record are encouraged to apply.

Apply for this job

Production work across our core operations: heat treat line loading, unloading, and pull, clean up, box stack, dip paint, hang and paint, assembly, and grinding. Reports to the Production Supervisor.

Starting pay by shift: $18.00 on 1st, $19.00 on 2nd, $20.00 on 3rd — and 3rd shift is where we need people most.

What you'll do:

• Provide production labor in assigned work areas and assist with production setup
• Work safely and follow Haven Steel's health and safety policies
• Work as part of a team toward company production standards
• Participate in first part and hourly quality audits
• Bring performance improvement ideas to your supervisor

Requirements:

• Able to lift 50 pounds, sometimes repetitively, throughout the shift
• Able to reach overhead and work standing, stooping, and kneeling; pushing, pulling, bending, and climbing
• Dexterous use of both hands and good corrected vision
• Able to work in above-average temperatures (100+ degrees)
• Able to work with minimum supervision after receiving job instructions
• Positive, respectful attitude and the ability to learn manufacturing operations and technology
• High school diploma or GED preferred

Duties and requirements listed are summaries only and not all-inclusive.

Apply — Kansas Apply — Tennessee

Build and maintain the tools and dies behind our spring steel products — grinding, precision smoothing, sharpening, and polishing. Reports to the Tooling Supervisor.

What you'll do:

• Die construction and maintenance of tooling for spring steel production
• Take a blueprint, bill of material, and die set, then fabricate, assemble, and prove out tooling to spec
• Troubleshoot die problems and perform routine die maintenance
• Run surface grinders, mills, lathes, and CNCs

Requirements:

• 2+ years of experience with machine shop equipment (required)
• 2+ years of CNC set-up and operating experience (required) — we currently run Hurco machining centers
• Conversational programming experience a plus
• Able to read micrometers, calipers, and measuring tape to within 1/32"
• Basic math, good communication, and good organization
• Self-motivated and able to work with little supervision
• Able to lift at least 45 pounds; reach overhead; work standing, stooping, and kneeling; pushing, pulling, bending, and climbing

Apply for this job

Assist in diemaking — grinding, precision smoothing, sharpening, and polishing — plus die maintenance and construction for our spring steel products. Reports to the Tooling Supervisor. A great step toward the Diemaker A role.

What you'll do:

• Die construction and maintenance of tooling for spring steel production
• Troubleshoot die problems and perform routine die maintenance
• Read and interpret blueprints
• Work with surface grinders, mills, lathes, and CNCs

Requirements:

• 2+ years of experience with machine shop equipment (required)
• Willing to pursue further education in tool and die making
• Able to read micrometers, calipers, and measuring tape to within 1/32"
• Basic math, good communication, and good organization
• Self-motivated and able to work with little supervision
• Able to lift at least 45 pounds; reach overhead; work standing, stooping, and kneeling; pushing, pulling, bending, and climbing

Apply for this job